HE127 - DuraSeal ASPHALT EMULSION is a commercial grade asphalt-based product designed to seal and protect asphalt pavement. This product is specially formulated with a very stable base emulsion, allowing for high amounts of quality reinforcing material. This provides a finished product that is widely known as the most durable asphalt emulsion seal coat on the market.

Usage
Duraseal is designed for use in sealing parking lots, driveways, residential streets , and other slow traffic asphalt surfaces.

HE193 - Dot Stick is a hot melt asphalt adhesive, which securely bonds pavement markers to asphalt concrete and portland cement concrete. It meets federal specifications and all requirements set forth by the California Department of Transportation.

Usage
This adhesive has been officially certified in many States, so please contact your Henry Sales Rep for details.

Coverage
This adhesive comes in 35 pound segmented boxes (3 blocks/box)

HE184 - FLEXIBLE Dot Stick is a hot melt asphalt adhesive, which securely bonds pavement markers to asphalt concrete and portland cement concrete. This flexible bituminous marker adhesive has superior bonding characteristics because of its high virgin polymer content and low amounts of filler.

Usage
This adhesive should be applied at approximately 350 F, and its temperature should never exceed 375 F.

Coverage
This adhesive comes in 24 pound, segmented boxes (3 blocks/box)

HE093 - Duroflex ASPHALT CRACK AND JOINT SEALANT is a premium hot melt, polymer-modified, asphalt crack sealant designed for use on asphalt and concrete streets, highways, and parking lots.

• Highly flexible with excellent adhesion properties, and it is suitable for use in all climates.
• Sets up quickly and will not bleed or track.

Usage
Comes in 35 lb boxes (1 block per box). Ideal application temperature is 360 F, and the material should never be heated to 400 F.

HE094 - Cal Seal CRACK SEALER is a mixture of paving asphalt, ground rubber, and polymer which conforms to all specifications set forth by the California Department of Transportation for hot melt material.

Usage
Used for sealing cracks in asphalt and concrete highways, city streets, and rural roadways. Application requires an oil jacketed melter, and the ideal application temperature is 375 F. The product temperature should never be elevated to 400 F.

Coverage
This sealer comes in 35 lb boxes (1 block per box).

HE760 - Duroflex DETECTOR LOOP SEALANT is a hot melt, polymer modified asphalt containing no recycled rubber. This highly elastomeric loop sealant has superior bonding characteristics to both asphalt and concrete surfaces.

• Made with only select virgin polymer, and the product exceeds California specifications.
• The material is officially certified in Oregon, and it meets or exceeds the specifications from most other states.
• At proper application temperatures, this sealant is a thin, free-flowing fluid, which easily penetrates narrow loop detector cuts.
• The ideal application temperature is 360 F, and it should never exceed 380 F.

Usage
Suitable for use in both asphalt concrete and portland cement concrete.

HE085 - GATOR-AID is a ready-to-use, asphaltic emulsion, mineral fillers, glass fiber, ground rubber, and plasticizers designed especially for alligatored areas.  Also used for filling cracks in excess of 1/2" in width on any asphaltic surfaces. 

• Usage
  For use on asphaltic surfaces such as athletic courts, driveways,  running tracks, playgrounds, and walkways.

Coverage
Can cover up to 75 linear feet of 1/2" x 1/2" depth cracks.

Can cover up to 20 square feet per gallon for patching alligatoring areas and bird baths 1/4" in depth.

HE019 - BINDER/TACK EMULSION is a fluid chemical emulsion containing surface active agents to aid in "wetting" pavement surfaces. It is stable to mixing with clean sand and coarse aggregates for the preparation of surfacing or patching mixes and extensive dilution with cool, clean soft water for use as a priming and tack coat.

Usage
Diluted HE019 - BINDER/TACK EMULSION is recommended for tack coating asphalt pavement surface whenever the bonding of pavement surface coating products is questionable. It is also used as the binder for mastic mixes for patching depressions, as a binder for cold laid asphalt pavement and as a damproofing coating for new construction

HE026 - SOLVENT BASED TACK COAT is a cold applied, non-fibered, liquid asphalt in a solvent system.

Usage
Henry's Solvent Based Tack Coat is intended for use as a substrate primer prior to paving applications. Henry's Solvent Based Tack Coat is also ideal for dampproofing above and below grade exterior concrete and masonry walls and foundations that are thoroughly dry.

Coverage
Can be brushed, squeegeed or sprayed at the rate of 0.8 to 1.2 gallons per 100 sq. ft.