111 InsulBond Roof Insulation Adhesive

• Solvent free rubberized asphalt emulsion adhesive
• Excellent low temperature flexibility
• Laminate insulation to insulation or to a variety of substrates including steel, concrete, plywood, light weight insulating concrete and most well bonded roof coatings
• Product can be used with Perlite, Fiberboard, Densdeck, EPS, Foamglas, Henry Re-Cover Board, approved polyisocyanurate, XEPS, and approved base sheets
• Apply with trowel, brush, roller or suitable spray equipment
• Coverage: 2 – 2.5 gallons/square

Sizes available:
5 gallon
50 gallon
55 gallon
275 gallon tote

203 Cold-Ap Roof and Lap Adhesive

• Use to bond layers of conventional, BUR, or SBS base and cap sheets (not APP)
• Replaces hot asphalt in BUR
• Used to seal laps and seams
• Greater cold-weather flexiblilty
• Allows longer working time
• For embedding polyester fabric, gravel, granules
• Not recommended for saturated felt
• Apply with brush, roller or squeegee
• Not for use over solvent-sensitive insulation
• ASTM D3019 Type III
• Coverage: 2 gallons/square

Sizes available:
5 gallon
55 gallon

403 Spray Grade Cold-Ap Cement

• Spray grade versioin of Henry 203
• Asbestos free
• Replaces hot asphalt in BUR
• Greater cold-weather flexibility
• Allows longer working time
• Use to bond layers of conventional, BUR, or SBS base and cap sheets (not APP)
• For embedding polyester fabric, gravel, granules
• Not recommended for saturated felt
• Not for use over solvent-sensitive insulation
• Apply with brush, roller or squeegee
• Also easy to apply with roller, brush, or squeegee
• ASTM D3019 Type III
• Coverage: 1.5 – 2 gallons/square

Sizes available:
5 gallon
55 gallon
bulk

553 MBA Elastomeric Modified Bitumen Adhesive

• An asbestos free, fibrated, rubberized adhesive, designed specifically for adhering SBS modified bitumen and asphalt coated membranes
• Exhibits excellent low temperature flexibility
• Lap strength adhesion properties far exceed the minimum requirements of ASTM D3019
• Eliminates the hazard of hot kettle fires and torch applications, as well as hot asphalt fumes and odors
• Does not require red label solvent identification
• Not for use over solvent-sensitive insulation, with modified bitumen products having polyethylene backing, or with APP modified products
• Apply with brush, squeegee, or sprayer
• ASTM D3019 Type III
• NOT FOR USE IN VOC RESTRICTED AREAS
• Coverage: 1.5 gallons/square

Sizes available:
5 gallon
55 gallon

554 MBA Elastomeric Modified Bitumen Flashing Cement

• Ideal for dampproofing above and below grade, exterior concrete and masonry walls and foundations
• Provides a durable, weather-resistant film
• Also used for the protection of metal and smooth-surfaced composition roofs
• Can also be used to coat gutters and flashings
• Coverage: 1.5 – 2 gallons/square

Sizes available:
11 oz. cartridge
3.5 gallon
5 gallon

902 PBA Permanent Bond Adhesive

• Premium Cold-Ap adhesive
• Premium, modified and rubberized, asbestos free, cold process, waterproofing roofing adhesive
• High solids formulation is modified with rubber polymer resulting in a high strength bond when used to adhere SBS modified bitumen membranes and other asphalt based roofing sheets
• Exhibits excellent low temperature flexibility and lap strength adhesion properties far exceeding the minimum requirements of ASTM-D-3019
• Does not require red label solvent identification
• Reduces the possibility of vapor entrapment, thereby eliminating the potential of any membrane softening or damage
• UL classified in a variety of SBS modified bitumen and cold process roofing assemblies
• Many advantages over the use of hot asphalt in applying SBS based modified bitumen cap sheets
• Eliminates the hazard of hot kettle fires and torch applications, as well as hot asphalt fumes and odors
• Roller / brush / squeegee / spray
• Not for use over solvent-sensitive insulation
• ASTM D3019 Type III
• Coverage: 2 gallons/square

Sizes available:
1 gallon
5 gallon

903 Modified Bitumen Membrane Adhesive – High Solids

• Premium, modified and rubberized, asbestos free, cold process, waterproofing roofing adhesive
• High solids fibered formulation is modified with SBS rubber polymer resulting in a high strength bond when used to adhere SBS modified bitumen membranes and other asphalt based roofing sheets
• Exhibits excellent low temperature flexibility and lap strength adhesion properties far exceeding the minimum requirements of ASTM-D-3019
• Does not require red label solvent identification
• UL classified in a variety of SBS modified bitumen and cold process roofing assemblies
• Many advantages over the use of hot asphalt in applying SBS based modified bitumen cap sheets
• Apply by notched squeegee or commercial grade spray equipment
• Eliminates the hazard of hot kettle fires and torch applications, as well as hot asphalt fumes and odors
• Not for use over solvent-sensitive insulation
• Coverage: 2 gallons/square

Sizes available:
5 gallon
55 gallon
bulk