Air Bloc® and Blueskin® SA

Optimize Energy Performance, Reduction (EA Credit 1.X), From 1 to 6 points.


Henry® Company manufactures over 17 different air barrier systems designed to resist uncontrolled air movement through the building envelope. According to the U.S. Department on Energy, up to 40% of the energy costs required to heat and cool a building are consumed due to air leakage through the building envelope. An air barrier system can substantially reduce the amount of this leakage, resulting in reduced building energy consumption.

Construction IAQ Management Plan, During Construction (EQ Credit 3.1), 1 point.

Henry Company's Air Bloc 33 system and Blueskin SA systems allow the contractor to quickly seal the skin of the building envelope early on in construction as the exterior sheathing is installed.

           Air Bloc: The air barrier system, which is vapor permeable and
           unaffected by UV radiation, will:
 
                   · Prevent the infiltration of jobsite dust and airborne pollutants
 
                   · Provide a rain barrier to protect absorptive materials from
                     moisture damage
 
                   · Allow moisture, which does get into the building during 
                     construction, the ability to diffuse outward through the wall 
                     system, reducing the possibility of condensation
                     within the system and possible mold growth.
 
           Blueskin SA: The air barrier system will:
 
                   · Prevent the infiltration of jobsite dust and airborne pollutants
 
                   · Provide a rain barrier to protect absorptive materials from
                     moisture damage

Low-Emitting Materials: Paints and Coatings (EQ Credit 4.2), point.
 
           Air Bloc: Henry Company's
           Air Bloc 31 and Air Bloc 33
           are water based products
           and are VOC compliant
 
           Blueskin SA: Henry 
           Company's Blueskin SA and
           water based AquatacTM Primer are classified as low-emitting.  

Regional Materials, 50% extracted regionally (MR Credit 5.X), 0 to 2 points.
 
           Air Bloc: Henry Company manufactures Air Bloc 31 and
           Air Bloc 33 in Garland, TX near Dallas or in Montreal,
           Quebec. Projects constructed within 500 miles of either of
           these two locations may qualify for LEED points.
 
           Blueskin SA: Henry Company manufactures Blueskin SA
           approximately 50 miles north of Detroit. Projects constructed
           within 500 miles of this location may qualify for LEED points.